| Weight | 1.43300 lb | ||
| power supply voltage | 12 to 24 vdc (ripple ?10% or less) | ||
| response time | 1 sec. or less | ||
| note 5)outputspecifications | accumulated pulse output | ||
| accumulated flow range note 4) | 0 to 999999 l | ||
| operating pressure range | 0 to 1 mpa | ||
| indicator light | 3-digit, 7-segment led | ||
| port size (rc, npt, g) | 3/8 | ||
| current consumption (no load) | 70 ma or less | ||
| repeatability | ?3% f.s. or less | ||
| operating fluid temperature | 0 to 50c | ||
| minimum set unit | 0.05 l/min | ||
| set flow rate range | 0.35 to 4.5 l/min | ||
| measured fluid | water |
| resistance | noise resistance | ||
| Hysteresis | hysteresis mode: variable (can be set from 0), window comparator mode note 6) : 3-digit fixed | ||
| status led?s | illuminates when output is on, out1: green; out2: red | ||
| ambient temperature range | operating: 0 to 50c, stored: ?25 to 85c (with no freezing and condensation) | ||
| proof pressure | 1.5 mpa | ||
| note 3)display units | accumulated flow | ||
| detection type | karman vortex | ||
| weight note 2) | 460 g | ||
| temperature characteristics note 1) | ?5% f.s. or less (0 to 50c, based on 25c) | ||
| Linearity | ?5% f.s. or less | ||
| accumulated pulse flow rate exchange value (pulse width: 50 ms) | 0.05 l/pulse | ||
| rated flow range | 0.5 to 4 l/min | ||
| flow rate measurement range | 0.35 to 4.5 l/min | ||
| model | pf2w704 |
