Festo 8037696 vacuum generator

OVEM-14-H-B-QO-CE-N-LK

$929.14 2 pcs. with 1 to 3 days delivery to United States

Specifications

Series (OVEM) Vacuum generator
Nominal width of Laval nozzle (14) 1.4 mm
Vacuum type (H) High vacuum
Housing width (B) 20 mm
Pneumatic connections (QO) Supply/vacuum port with QS fi ttings, exhaust port with open silencer
Normal position of the vacuum generator (CE) NC, normally closed (no vacuum generation) with ejector pulse
Electrical connection (N) Plug M12 (5-pin)
Vacuum sensor (LK) IO-Link®
Alternative vacuum display Without
Material seals NBR
Material electrical contact Gold-plated brass
Material transmitter nozzle Wrought aluminium alloy
Material fitting Nickel-plated brass
Grid dimension 20 mm
Mounting position optional
Grade of filtration 40 µm
Integrated function Electric ejector pulse valve Flow control Electric on-off valve Filter Air saving function, electrical Check valve Open silencer Vacuum switch
Short circuit current rating yes
Measuring principle Piezoresistive
Switching function Window comparator Threshold value comparator
Valve function Closed
Standard switching input IEC 61131-2
Indicating range -0,999 bar ... 0 bar
Setting range hysteresis -0,9 bar ... 0 bar
Switching position indicator LCD
Setting range threshold value -0,999 bar ... 0 bar
Operating pressure for max. vacuum 3,6 bar
Nominal operating pressure 6 bar
Air supply time at nominal operating pressure 0,2 s
Duty cycle 100%
Max. output current 100 mA
Switching output 2xPNP
Characteristic coil data 24 V DC: low-current phase 0.3 W, high-current phase 2.55 W
Overload protection Available
Approval RCM trademark c UL us listed (OL)
CE mark (see declaration of conformity) To EU EMC Directive
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Corrosion resistance class CRC 2 - Moderate corrosion stress
Relative air humidity 5 - 85 %
Degree of protection IP65
Ambient temperature 0 °C ... 50 °C
Product weight 380 g
Accuracy in ± % FS 3 %FS
Protocol IO-Link®
IO-Link, Profile Smart sensor profile
IO-Link, communication mode COM2 (38.4 kBaud)
IO-Link, Process data length OUT 1 bytes
IO-Link, Process data length IN 2 bytes
IO-Link, Min. cycle time 3.5 ms
IO-Link, Device ID 0x00003E
Protection against tampering Electronic interlock
Pneumatic connection, port 1 QS-8
Vacuum connection QS-8
Material receiver nozzle POM
Material housing Die-cast aluminium PA-reinforced
Material silencer Wrought aluminium alloy PU foam
Material screen PA
Material connector housing Nickel-plated brass
Material pins Steel
Material keypad TPE-U
Nominal size, Laval nozzle 1,4 mm
Silencer design Open
Ejector characteristic High vacuum Standard
Manual override Non-detenting Additionally via operating buttons
Design Modular
Measured variable Relative pressure
Switching element function N/C contact N/O contact
Symbol 992,094
Reverse polarity protection For all electrical connections
Display type 4-place alphanumeric Back-lit LCD
Displayable units bar
Setting options IO-Link® Via display and keys
Switching status indication Optical
Operating pressure 2 bar ... 8 bar
Max. vacuum 93 %
Max. suction flow rate against atmosphere 50,5 l/min
Operational voltage range DC 20,4 V ... 27,6 V
Insulation voltage 50 V
Off-state current 0,1 mA
Voltage drop ≤ 1,8 V
Immunity to surge 0,8 kV
Pollution degree 3
KC mark KC-EMV
CE marking (see declaration of conformity) To UK instructions for EMC
Note on operating and pilot medium Lubricated operation not possible
Media temperature 0 °C ... 50 °C
Sound pressure level at nominal operating pressure 77 dB(A)
Protection class III
Max. tightening torque 0.8 Nm with female thread 2.5 Nm with through-hole
Pressure measuring range -1 bar ... 0 bar
Reproducibility of switching values FS 0,6 %
IO-Link, Protocol version Device V 1.1
IO-Link, Function classes Binary data channel (BDC) Process data variable (PDV) Identification Diagnostics Teach channel
IO-Link, Port class A
IO-Link, Process data content OUT 1 bit (ejector pulse IN/OUT) 1 bit (vacuum ON/OFF)
IO-Link, Process data content IN 14 bit PDV (pressure measurement value) 2 bit BDC (pressure monitoring)
IO-Link, Data storage required 500 Byte
Electrical connection 5-pin M12x1 Plugs
Type of mounting With through-hole Via female thread With accessories
Pneumatic connection, port 3 QS-8
Note on materials Contains paint-wetting impairment substances RoHS-compliant
Material filter Fabric PA Sintered steel
Material adjusting screw Steel
Material screws Steel
$929.14
Stock 2 pcs.
Part number 8037696
Manufacturer Festo
Quantity Unit Price
1+ $929.14

  • Open Registration
    Create your account instantly
  • Support 24/7
    Ask us anytime
  • 100% Safety
    Only secure payments: bank transfer, credit card and PayPal
  • Volume Discounts
    Optimize your supplies