| Guidance rib diameter of inner ring | d1 | 114 | mm |
| Minimum chamfer dimension of outer ring back face | r3, 4 min | 3.30 | mm |
| Distance between the apexes of the pressure cones | a | 33 | mm |
| Minimum chamfer dimension of inner ring back face | r1, 2 min | 3.60 | mm |
| Maximum fillet radius of shaft | ra max | 3.60 | mm |
| Maximum diameter of housing shoulder | Da max | 135 | mm |
| Maximum diameter of shaft shoulder | da max | 92 | mm |
| Minimum axial space | Ca min | 8 | mm |
| Minimum diameter of shaft shoulder | db min | 99 | mm |
| Limiting speed | nG | 4,750 | |
| Basic static load rating, radial | C0r | 305,000 | |
| Width, total | T | 41.28 | mm |
| Width, inner ring | Bi | 41.28 | mm |
| Bore diameter | d | 82.55 | mm |
| Fatigue load limit, radial | Cur | 37,500 | |
| Basic dynamic load rating, radial | Cr | 211,000 | |
| Width, outer ring | B | 31.75 | mm |
| Outside diameter | D | 146.05 | mm |
