| Guidance rib diameter of inner ring | d1 | 97.30 | mm |
| Minimum chamfer dimension of outer ring back face | r3, 4 min | 3.30 | mm |
| Distance between the apexes of the pressure cones | a | 35 | mm |
| Minimum chamfer dimension of inner ring back face | r1, 2 min | 4.30 | mm |
| Maximum fillet radius of shaft | ra max | 4.30 | mm |
| Maximum diameter of housing shoulder | Da max | 124 | mm |
| Maximum diameter of shaft shoulder | da max | 77 | mm |
| Minimum axial space | Ca min | 9 | mm |
| Minimum diameter of shaft shoulder | db min | 87 | mm |
| Limiting speed | nG | 5,200 | |
| Basic static load rating, radial | C0r | 350,000 | |
| Width, total | T | 53.98 | mm |
| Width, inner ring | Bi | 56.01 | mm |
| Bore diameter | d | 66.68 | mm |
| Fatigue load limit, radial | Cur | 42,500 | |
| Basic dynamic load rating, radial | Cr | 260,000 | |
| Width, outer ring | B | 44.45 | mm |
| Outside diameter | D | 135.755 |
