| Guidance rib diameter of inner ring | d1 | 203.80 | mm |
| Minimum chamfer dimension of outer ring back face | r3, 4 min | 1.50 | mm |
| Distance between the apexes of the pressure cones | a | 43 | mm |
| Minimum chamfer dimension of inner ring back face | r1, 2 min | 1.50 | mm |
| Maximum fillet radius of shaft | ra max | 1.50 | mm |
| Minimum diameter of shaft shoulder | db min | 188 | mm |
| Minimum axial space | Ca min | 7 | mm |
| Maximum diameter of shaft shoulder | da max | 186 | mm |
| Limiting speed | nG | 2,950 | |
| Basic static load rating, radial | C0r | 395,000 | |
| Width, total | T | 30.16 | mm |
| Width, inner ring | Bi | 30.16 | mm |
| Bore diameter | d | 177.80 | mm |
| Fatigue load limit, radial | Cur | 42,500 | |
| Basic dynamic load rating, radial | Cr | 187,000 | |
| Width, outer ring | B | 23.02 | mm |
| Outside diameter | D | 227.012 |
