| Width, outer ring | B | 26.50 | mm |
| Outside diameter | D | 110 | mm |
| Maximum axial clamping force | 20,800 | ||
| Limiting speed | nG | 2,900 | |
| Basic static load rating, radial | C0r | 159,000 |
| Width, inner ring | Bi | 27 | mm |
| Bore diameter | d | 70 | mm |
| Load carrying capacity of snap ring connection | FBR | 49,000 | |
| Fatigue load limit, radial | Cur | 20,500 | |
| Basic dynamic load rating, radial | Cr | 104,000 |
| Upper limit deviation | Δu | 0.05 | mm |
| Distance between the apexes of the pressure cones | a | 25 | mm |
| Diameter of groove | D1 | 104.80 | mm |
| Stand out inner to outer ring | u | 0.03 | mm |
| Width of groove | m/2 | 1.25 | mm |
| Minimum chamfer dimension of inner ring back face | r1, 2 min | 1.50 | mm |
| Upper limit deviation | ΔDn | 0.22 | mm |
| Minimum diameter of shaft shoulder | db min | 77 | mm |
| Maximum fillet radius of shaft | ra max | 1.50 | mm |
| Maximum diameter of shaft shoulder | da max | 78 | mm |
