| Width, outer ring | B | 25 | mm |
| Outside diameter | D | 95 | mm |
| Maximum axial clamping force | 16,400 | ||
| Limiting speed | nG | 3,350 | |
| Basic static load rating, radial | C0r | 123,000 |
| Width, inner ring | Bi | 26 | mm |
| Bore diameter | d | 60 | mm |
| Load carrying capacity of snap ring connection | FBR | 59,300 | |
| Fatigue load limit, radial | Cur | 15,200 | |
| Basic dynamic load rating, radial | Cr | 82,000 |
| Upper limit deviation | Δu | 0.05 | mm |
| Distance between the apexes of the pressure cones | a | 23 | mm |
| Diameter of groove | D1 | 89.30 | mm |
| Stand out inner to outer ring | u | 0.03 | mm |
| Width of groove | m/2 | 1.25 | mm |
| Minimum chamfer dimension of inner ring back face | r1, 2 min | 1.50 | mm |
| Upper limit deviation | ΔDn | 0.22 | mm |
| Minimum diameter of shaft shoulder | db min | 67 | mm |
| Maximum fillet radius of shaft | ra max | 1.50 | mm |
| Maximum diameter of shaft shoulder | da max | 67 | mm |
