| Material setting screw | High-alloy steel | ||
| Material sensor rail | Wrought aluminium alloy Anodised | ||
| Material swivel lever | Case-hardened steel Burnished | ||
| Material retaining bracket | Wrought aluminium alloy Anodised | ||
| Material spring pressure piece | High-alloy steel | ||
| Material stops | High-alloy steel | ||
| Pneumatic connection waiting position | M5 | ||
| Product weight | 3.260 g | ||
| Max. process force in Y direction | 35 N | ||
| Max. moment Mz | 1,5 Nm | ||
| Max. moment Mx | 1,5 Nm | ||
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) | ||
| Repetition accuracy end positions | +/-0.02 mm | ||
| Operating pressure | 4 bar ... 8 bar | ||
| Design | Linear guide plus ball bearing Semi-rotary drive Force pilot operated motion sequence | ||
| Cushioning | Shock absorber at both ends Soft characteristic curve | ||
| Max. Z stroke waiting position | 15 mm | ||
| Size | 12 |
| Material bar | Wrought aluminium alloy Anodised | ||
| Material slotted guide plate | Case-hardened steel Hardened | ||
| Material cross-guide | Tempered steel | ||
| Material base plate | Wrought aluminium alloy Anodised | ||
| Material cover | Wrought aluminium alloy Anodised | ||
| Pneumatic connection | M5 | ||
| Type of mounting | Via through-hole and centring sleeve | ||
| Theoretical force at 0.6 MPa (6 bar, 87 psi) | 35 N | ||
| Max. effective load | 1 kg | ||
| Max. moment My | 1,5 Nm | ||
| Ambient temperature | 0 °C ... 60 °C | ||
| Operating medium | Compressed air to ISO 8573-1:2010 [7:-:-] | ||
| Min. cycle time | 0,8 s | ||
| Position detection | Via proximity switch | ||
| Mounting position | optional | ||
| Z stroke | 80 mm ... 100 mm | ||
| Max. linear stroke with 90° swivel angle | 142/142 mm | ||
| Working stroke | 15 mm ... 25 mm |
