| Minimum chamfer dimension | rmin | 0.60 | mm |
| Contact angle | α | 17 | ° |
| Bore diameter | d | 30 | mm |
| Width | B | 13 | mm |
| Basic static load rating, radial | C0r | 3,900 | |
| Limiting speed for grease lubrication | nG Grease | 48,300 |
| Outside diameter | D | 55 | mm |
| Basic dynamic load rating, radial | Cr | 8,900 | |
| Fatigue load limit, radial | Cur | 315 | N |
| Limiting speed for oil lubrication | nG Oil | 70,600 |
| Diameter shaft shoulder | da | 36 | mm |
| Shoulder diameter outer ring | Da | 49 | mm |
| Maximum recess radius | ra max | 0.30 | mm |
| Maximum diameter injection pitch | Etk max | 40.90 | mm |
| Diameter shaft shoulder clearance | da | h12 | |
| Shoulder diameter outer ring clearance | Da | H12 | |
| Minimum diameter injection pitch | Etk min | 37.10 | mm |
| Distance between the apexes of the pressure cones | a | 13 | mm |
