| Contact angle | α | 25 | ° |
| Minimum chamfer dimension | rmin | 1 | mm |
| Distance between the apexes of the pressure cones | a | 23.40 | mm |
| Distance to lubrication hole | SN | 7.20 | mm |
| Maximum recess radius | ra max | 0.30 | mm |
| Shoulder diameter outer ring | Da | 80.50 | mm |
| Diameter shaft shoulder | da | 65 | mm |
| Width of lubricating groove | SB | 1.40 | mm |
| Distance ring grooves | BN | 2.80 | mm |
| Shoulder diameter outer ring clearance | Da | H12 | |
| Diameter shaft shoulder clearance | da | h12 |
| Limiting speed for oil lubrication | nG Oil | 30,000 | |
| Fatigue load limit, radial | Cur | 1,170 | |
| Basic dynamic load rating, radial | Cr | 23,400 | |
| Outside diameter | D | 85 | mm |
| Limiting speed for grease lubrication | nG Grease | 20,000 | |
| Basic static load rating, radial | C0r | 14,500 | |
| Width | B | 13 | mm |
| Bore diameter | d | 60 | mm |
