| Distance to lubrication hole | SN | 9.30 | mm |
| Maximum recess radius | ra max | 0.30 | mm |
| Shoulder diameter outer ring | Da | 94.50 | mm |
| Diameter shaft shoulder | da | 76 | mm |
| Width of lubricating groove | SB | 1.40 | mm |
| Distance ring grooves | BN | 3.10 | mm |
| Shoulder diameter outer ring clearance | Da | H12 | |
| Diameter shaft shoulder clearance | da | h12 | |
| Distance between the apexes of the pressure cones | a | 27.80 | mm |
| Limiting speed for oil lubrication | nG Oil | 34,000 | |
| Fatigue load limit, radial | Cur | 940 | N |
| Basic dynamic load rating, radial | Cr | 16,800 | |
| Outside diameter | D | 100 | mm |
| Limiting speed for grease lubrication | nG Grease | 22,000 | |
| Basic static load rating, radial | C0r | 11,700 | |
| Width | B | 16 | mm |
| Bore diameter | d | 70 | mm |
| Contact angle | α | 25 | ° |
| Minimum chamfer dimension | rmin | 1 | mm |
