| Contact angle | α | 25 | ° |
| Minimum chamfer dimension | rmin | 1.50 | mm |
| Distance between the apexes of the pressure cones | a | 41.10 | mm |
| Distance to lubrication hole | SN | 14.50 | mm |
| Maximum recess radius | ra max | 0.60 | mm |
| Shoulder diameter outer ring | Da | 141 | mm |
| Diameter shaft shoulder | da | 110 | mm |
| Width of lubricating groove | SB | 2.20 | mm |
| Distance ring grooves | BN | 5.50 | mm |
| Shoulder diameter outer ring clearance | Da | H12 | |
| Diameter shaft shoulder clearance | da | h12 |
| Limiting speed for oil lubrication | nG Oil | 22,000 | |
| Fatigue load limit, radial | Cur | 1,860 | |
| Basic dynamic load rating, radial | Cr | 34,500 | |
| Outside diameter | D | 150 | mm |
| Limiting speed for grease lubrication | nG Grease | 15,000 | |
| Basic static load rating, radial | C0r | 26,000 | |
| Width | B | 24 | mm |
| Bore diameter | d | 100 | mm |
