| Width inner ring, lower tolerance | BUT | -0.15 | mm |
| Radial Clearance | Gr | 0 - 0,072 | |
| Shank diameter, large | d5 | 98 | mm |
| length rod end shank | l5 | 20 | mm |
| Thread length Internal thread | l3 | 80 | mm |
| Width of the rod end | C1 | 42 | mm |
| Shank diameter | d4 | 80 | mm |
| Outer eye diameter | d2 | 160 | mm |
| Ball diameter | dK | 92 | mm |
| Bore diameter bearing, lower tolerance | dUT | -0.02 | mm |
| Width Across Flat | W | 85 | mm |
| Distance drilling with/shaft start | l7 | 87 | mm |
| Total length internal thread head | l4 | 280 | mm |
| Tilt angle | α | 6 | ° |
| Shank Length Internal thread head | h1 | 200 | mm |
| Thread size | d3 | M56x4 | |
| Outer flange diameter inner ring | d1 | 77.90 | mm |
| Edge Spacing | r1smin | 1 | mm |
| Basic static load rating, radial | C0r | 564,000 | |
| Width inner ring | B | 49 | mm |
| Bore diameter bearing | d | 70 | mm |
| Basic dynamic load rating, radial | Cr | 883,000 | |
| Outside diameter bearing | D | 105 | mm |
