| Width inner ring, lower tolerance | BUT | -0.12 | mm |
| Radial Clearance | Gr | 0 - 0,06 | |
| Shank diameter, large | d5 | 70 | mm |
| length rod end shank | l5 | 20 | mm |
| Thread length Internal thread | l3 | 65 | mm |
| Width of the rod end | C1 | 27 | mm |
| Shank diameter | d4 | 58 | mm |
| Outer eye diameter | d2 | 102 | mm |
| Ball diameter | dK | 60 | mm |
| Bore diameter bearing, lower tolerance | dUT | -0.01 | mm |
| Width Across Flat | W | 60 | mm |
| Distance drilling with/shaft start | l7 | 52 | mm |
| Total length internal thread head | l4 | 196 | mm |
| Tilt angle | α | 7 | ° |
| Shank Length Internal thread head | h1 | 145 | mm |
| Thread size | d3 | M42x3 | |
| Outer flange diameter inner ring | d1 | 50.70 | mm |
| Edge Spacing | r1smin | 0.60 | mm |
| Basic static load rating, radial | C0r | 259,000 | |
| Width inner ring | B | 32 | mm |
| Bore diameter bearing | d | 45 | mm |
| Basic dynamic load rating, radial | Cr | 360,000 | |
| Outside diameter bearing | D | 68 | mm |
