| Width inner ring, lower tolerance | BUT | -0.12 | mm |
| Radial Clearance | Gr | 0 - 0,06 | |
| Thread length external thread | l1 | 107 | mm |
| Width of the rod end | C1 | 30 | mm |
| Thread size | d3 | M45x3 | |
| Ball diameter | dK | 66 | mm |
| Bore diameter bearing, lower tolerance | dUT | -0.01 | mm |
| Distance drilling with/shaft start | l7 | 60 | mm |
| Tilt angle | α | 6 | ° |
| Shank Length External thread rod | h | 185 | mm |
| Outer flange diameter inner ring | d1 | 55.90 | mm |
| Edge Spacing | r1smin | 0.60 | mm |
| Basic static load rating, radial | C0r | 314,000 | |
| Width inner ring | B | 35 | mm |
| Outside diameter bearing | D | 75 | mm |
| Bore diameter bearing | d | 50 | mm |
| Basic dynamic load rating, radial | Cr | 444,000 | |
| Total length external thread rod | l2 | 241 | mm |
| Outer eye diameter | d2 | 112 | mm |
| Manufacturer | Part Number |
|---|---|
| Durbal | EM50-21-502 |
| SKF | SALA50 TXE-2LS (SKF) |
| SKF | SALA50TE-2RS |
