| Width inner ring, lower tolerance | BUT | -0.12 | mm |
| Bore diameter bearing, tolerance | dT | H7 | |
| Thread length external thread | l1 | 28 | mm |
| Width of the rod end | C1 | 10.50 | mm |
| Thread size | d3 | M10 | |
| Ball diameter | dK | 19.05 | mm |
| Bore diameter bearing, upper tolerance | dOT | 0.02 | mm |
| Radial Clearance | Gr | 0 - 0,035 | |
| Tilt angle | α | 13 | ° |
| Shank Length External thread rod | h | 48 | mm |
| Outer flange diameter inner ring | d1 | 12.90 | mm |
| Edge Spacing | r1smin | 0.30 | mm |
| Basic static load rating, radial | C0r | 18,500 | |
| Width inner ring | B | 14 | mm |
| Outside diameter bearing | D | 22 | mm |
| Bore diameter bearing | d | 10 | mm |
| Basic dynamic load rating, radial | Cr | 18,100 | |
| Total length external thread rod | l2 | 62 | mm |
| Outer eye diameter | d2 | 28 | mm |
| Manufacturer | Part Number |
|---|---|
| Durbal | BEM10-20-501 (DURBAL) |
| IKO | POS10-EC (IKO) |
| SKF | SAKB10-F (SKF) |
| Askubal | KA10-D |
| Askubal | KA10-DL |
| WSW Wälzlager | SAK10C |
| SKF | SAKAB10T |
| Elges | GAKFR10PW |
| Hirschmann | SMCP10 |
