Size | 50 | ||
Material spindle | Rolled steel | ||
Material screws | Galvanised steel | ||
Material cover | Wrought aluminium alloy, smooth anodised | ||
Interface code, actuator | D50 | ||
Additional weight per 10 mm stroke | 65 g | ||
Additional moving mass per 10 mm stroke | 35 g | ||
Mass moment of inertia JO | 0,187 kgcm² | ||
Mass moment of inertia JH per metre of stroke | 1,042 kgcm² | ||
Reference value effective load, horizontal | 500 kg | ||
Max. feed force Fx | 5.000 N | ||
Max. drive torque | 9,2 Nm | ||
Degree of protection | IP40 | ||
Suitable for use with food | See supplementary material information | ||
LABS (PWIS) conformity | VDMA24364 zone III | ||
Duty cycle | 100% | ||
Max. speed | 0,67 m/s | ||
Protection against torque/guide | With plain-bearing guide | ||
Spindle type | Ball screw | ||
Position detection | Via proximity switch | ||
Piston-rod end | Male thread | ||
Based on standard | ISO 15552 | ||
Spindle pitch | 10 mm/U | ||
Reversing backlash theoretical | 30 µm | ||
Stroke | 300 mm |
Material cylinder barrel | Smooth-anodised wrought aluminium alloy | ||
Material spindle nut | Rolled steel | ||
Material piston rod | High-alloy stainless steel | ||
Note on materials | RoHS-compliant | ||
Type of mounting | Via female thread Or accessories | ||
Basic weight for 0 mm stroke | 1.982 g | ||
Moving mass for 0 mm stroke | 793 g | ||
Mass moment of inertia JL per kg of working load | 0,025 kgcm² | ||
Reference value effective load, vertical | 500 kg | ||
Frictional torque independent of load | 0,3 Nm | ||
Max. radial force at drive shaft | 300 N | ||
Ambient temperature | 0 °C ... 60 °C | ||
Relative air humidity | 0 - 95% | ||
Storage temperature | -20 °C ... 60 °C | ||
Corrosion resistance class CRC | 2 - Moderate corrosion stress | ||
Repetition accuracy | ±0.01 mm | ||
Max. acceleration | 15 m/s² | ||
Symbol | 991,941 | ||
Design | Electric cylinder with ball screw | ||
Type of motor | Stepper motor Servo motor | ||
Mounting position | optional | ||
Torsional backlash at piston rod +/- | 0,15 deg | ||
Spindle diameter | 20 mm | ||
Piston rod thread | M16x1.5 |