Material spindle | Steel | ||
Material slide | Wrought aluminium alloy Anodised | ||
Material guide slide | Steel | ||
Note on materials | Contains paint-wetting impairment substances RoHS-compliant | ||
Material end cap | Wrought aluminium alloy Anodised | ||
Dynamic deflection (moving load) | 0.05% of the axis length, max. 0.5 mm | ||
Weight of additional slide | 1.110 g | ||
Feed constant | 20 mm/U | ||
Mass moment of inertia JL per kg of working load | 0,101 kgcm² | ||
Torsional mass moment of inertia It | 67.300 mm⁴ | ||
Max. radial force at drive shaft | 250 N | ||
My at theoretical life value of 100 km (only guide consideration) | 839 Nm | ||
Max. moment Mz | 228 Nm | ||
Max. moment Mx | 36 Nm | ||
Fy at theoretical life value of 100 km (only guide consideration) | 9.200 N | ||
Max. force Fy | 2.500 N | ||
Idle torque at vmax | 0,6 Nm | ||
2nd moment of area Iy | 310.000 mm⁴ | ||
Degree of protection | IP40 | ||
Max. speed | 1 m/s | ||
Max. acceleration | 15 m/s² | ||
Symbol | 991,211 | ||
Type of motor | Stepper motor Servo motor | ||
Guide | Recirculating ball bearing guide | ||
Spindle pitch | 20 mm/U | ||
Stroke reserve | 0 mm | ||
Working stroke | 600 mm |
Material spindle nut | Steel | ||
Material guide rail | Steel | ||
Material drive cover | Wrought aluminium alloy Anodised | ||
Material profile | Wrought aluminium alloy Anodised | ||
Static deflection (load in standstill) | 0.1% of the axis length | ||
Additional weight per 10 mm stroke | 46,5 g | ||
Moving mass | 1.370 g | ||
Mass moment of inertia JO | 0,097 kgcm² | ||
Mass moment of inertia JH per metre of stroke | 0,346 kgcm² | ||
Max. feed force Fx | 1.600 N | ||
Mz at theoretical life value of 100 km (only guide consideration) | 839 Nm | ||
Mx at theoretical life value of 100 km (only guide consideration) | 132 Nm | ||
Max. moment My | 228 Nm | ||
Fz at theoretical life value of 100 km (only guide consideration) | 11.224 N | ||
Max. force Fz | 3.050 N | ||
Idle torque at vmin | 0,35 Nm | ||
2nd moment of area Iz | 977.000 mm⁴ | ||
Ambient temperature | -10 °C ... 60 °C | ||
Repetition accuracy | ±0.02 mm | ||
Max. rotational speed | 3.000 rpm | ||
Functional principle of measuring system | Incremental | ||
Spindle type | Ball screw | ||
Design | Electromechanical linear axis With ball screw | ||
Mounting position | optional | ||
Spindle diameter | 15 mm | ||
Size | 80 |