Material cylinder barrel | High-alloy stainless steel | ||
Material seals | NBR TPE-U(PU) | ||
Note on materials | RoHS-compliant | ||
Type of mounting | With accessories | ||
Impact energy in end positions | 0,3 J | ||
Corrosion resistance class CRC | 2 - Moderate corrosion stress 3 - high corrosion stress | ||
Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] | ||
Explosion ignition protection type for dust | Ex h IIIC T120°C Db | ||
ATEX category dust | II 2D | ||
Explosion protection | Zone 1 (ATEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 22 (ATEX) | ||
Mode of operation | Double-acting | ||
Protection against torque/guide | Square piston rod | ||
Position detection | Via proximity switch | ||
Conforms to standard | CETOP RP 52 P ISO 6432 | ||
Cushioning | Elastic cushioning rings/plates at both ends Self-adjusting pneumatic end-position cushioning Pneumatic cushioning, adjustable at both ends | ||
Stroke | 1 mm ... 500 mm |
Material piston rod | High-alloy stainless steel | ||
Material cover | Wrought aluminium alloy | ||
Pneumatic connection | G1/8 | ||
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke | 247 N ... 295 N | ||
Ambient temperature | -20 °C ... 120 °C | ||
Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) | ||
Explosion ambient temperature | -20°C <= Ta <= +60°C | ||
Explosion ignition protection type for gas | Ex h IIC T4 Gb | ||
ATEX category gas | II 2G | ||
CE mark (see declaration of conformity) | To EU Explosion Protection Directive (ATEX) | ||
Operating pressure | 1 bar ... 10 bar | ||
Variants | Increased chemical resistance Extended male piston rod thread Piston rod with female thread Custom thread on the piston rod Piston rod with male thread shortened at one end Extended piston rod Clamping unit on the piston rod Axial supply port With direct mounting Lateral supply port With protection against rotation High corrosion protection Uniform, slow movement Low friction Through piston rod Heat-resistant seals max. 120°C Piston rod at one end | ||
Design | Piston Piston rod Cylinder barrel | ||
Mounting position | optional | ||
Piston diameter | 25 mm |
Stock | Ask for quotation |
---|---|
Part number | 193991 |
Manufacturer | Festo |
Quantity | Unit Price |
---|---|
1+ | $343.66 |