| Material bellows | NBR PA | ||
| Material bearing | Bronze Metal polymer compound POM | ||
| Material nut | Galvanised steel | ||
| Cushioning piston material | Aluminium POM | ||
| Material piston rod wiper | FPM HNBR PE TPE-U(PU) | ||
| Material piston | Wrought aluminium alloy | ||
| Piston clamping unit material | POM | ||
| Material piston seal | FPM HNBR TPE-U(PU) | ||
| Clamping unit housing material | Anodised wrought aluminium alloy | ||
| Material cover | Die-cast aluminium, coated | ||
| Pneumatic connection | G1/8 | ||
| Additional weight per piston rod thread extension of 10 mm | 6 g | ||
| Additional weight per 10 mm stroke | 26 g ... 41 g | ||
| Additional moving mass per 10 mm stroke | 8 g ... 18 g | ||
| Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke | 415 N ... 483 N | ||
| Max. torque for protection against torsion | 0,8 Nm | ||
| Impact energy in end positions | 0,1 J ... 0,4 J | ||
| Corrosion resistance class CRC | 2 - Moderate corrosion stress 3 - high corrosion stress | ||
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] | ||
| Explosion ambient temperature | -20°C <= Ta <= +60°C | ||
| Explosion ignition protection type for gas | Ex h IIC T4 Gb | ||
| ATEX category gas | II 2G | ||
| CE marking (see declaration of conformity) | To UK EX instructions | ||
| Mode of operation | Double-acting | ||
| Locking pressure | ≤ 0,5 bar | ||
| Axial backlash end-position locking | 1,3 mm | ||
| Mode of operation end-position locking | Positive interlocking with stop cylinder Released through compressed air | ||
| Axial backlash clamping unit | 0,5 mm | ||
| Mode of operation clamping unit | Retracting Advancing Static Released through compressed air Frictional clamping with spring force | ||
| Symbol | 00991217 00991218 00991235 00991237 00991257 00991258 00991907 00991910 00992970 00992971 | ||
| Design | Piston Piston rod Profile barrel | ||
| Conforms to standard | ISO 15552 | ||
| Cushioning | Elastic cushioning rings/plates at both ends Self-adjusting pneumatic end-position cushioning Pneumatic cushioning, adjustable at both ends | ||
| Torsional backlash at piston rod +/- | -0,65 deg ... 0,65 deg | ||
| Piston diameter | 32 mm |
| Material collar screws | Galvanised steel | ||
| Material rod wiper | Brass PTFE reinforced | ||
| Material cylinder barrel | Smooth-anodised wrought aluminium alloy | ||
| Buffer seal material | FPM TPE-U(PU) | ||
| Material piston rod | High-alloy stainless steel, hard chrome-plated High-alloy steel High-alloy stainless steel | ||
| Material piston end-position locking | High-alloy steel | ||
| Material clamping jaws clamping unit | Brass | ||
| Material housing end-position locking | Anodised wrought aluminium alloy | ||
| Material spring | Spring steel High-alloy stainless steel | ||
| Note on materials | Contains paint-wetting impairment substances RoHS-compliant | ||
| Type of mounting | Via female thread With accessories Either: | ||
| Additional weight per piston rod extension of 10 mm | 9 g | ||
| Basic weight for 0 mm stroke | 453 g ... 917 g | ||
| Moving mass for 0 mm stroke | 91 g ... 231 g | ||
| Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke | 415 N | ||
| Cushioning length | 0 mm ... 17 mm | ||
| Ambient temperature | -40 °C ... 150 °C | ||
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) | ||
| Explosion protection certification outside the EU | EPL Db (GB) EPL Gb (GB) | ||
| Explosion ignition protection type for dust | Ex h IIIC T120°C Db | ||
| ATEX category dust | II 2D | ||
| Explosion protection | Zone 1 (ATEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 22 (ATEX) | ||
| CE mark (see declaration of conformity) | To EU Explosion Protection Directive (ATEX) | ||
| Operating pressure | 0,1 bar ... 12 bar | ||
| Unlocking pressure | ≥ 2,5 bar | ||
| Static holding force of end-position locking | 500 N | ||
| Clamping unit release pressure | 3 bar | ||
| Static holding force of clamping unit | 600 N | ||
| Variants | For unlubricated operation Clamping unit attached End-position locking at both ends End-position locking with piston rod in retracted position End-position locking with piston rod in advanced position Increased chemical resistance Bellows on bearing cap Hard scraper Extended male piston rod thread Piston rod with female thread Extended piston rod Low friction for balancer applications Metal scraper With protection against rotation Uniform, slow movement Low friction Through piston rod Heat-resistant seals max. 120°C Sensor slots on 3 profile sides Temperature range 0 to 150°C Temperature range -40 to 80°C Piston rod at one end | ||
| Position detection | Via proximity switch | ||
| Piston-rod end | Male thread Female thread | ||
| Mounting position | optional | ||
| Based on standard | ISO 15552 | ||
| Piston rod thread | M6 M10x1.25 | ||
| Stroke | 1 mm ... 2.800 mm |