FESTO 668651 bearing cap module

Name: 668651 FESTO
Brand: FESTO
SKU: 711237-en-usd
Price: 234.5 USD
Availability: InStock

DNCI-63-P-A-S2

$234.50 ~~$381.07~~ -38%

available with 7 to 15 days delivery to United States

Specifications

Series (DNCI)	Standards-based cylinder, integrated displacement encoder
Piston diameter [mm] (63)	63
Stroke [mm]	Undefined
Cushioning (P)	Elastic cushioning rings/plates on both sides
Position sensing (A)	For proximity sensor
Piston rod type (S2)	Through piston rod

Material cylinder barrel		Wrought aluminium alloy
Material sensor head		POM
Material screws		Steel
Material cable sheath		TPE-U(PUR)
Material cover		Wrought aluminium alloy
Pneumatic connection		G3/8
Cable length		1,5 m
Repetition accuracy Soft Stop intermediate position		+/-2 mm
Max. controllable force during return stroke		1.514 N
Repetition accuracy in ± mm		0,5 mm
Additional weight per 10 mm stroke		71 g
Additional moving mass per 10 mm stroke		23 g
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke		1.682 N ... 1.870 N
Min. working load, vertical		12 kg
Max. working load, vertical		60 kg
Max. torque for protection against torsion		≤ 0,05 Nm
Ambient temperature		-20 °C ... 80 °C
Degree of protection		IP65 To IEC 60529
LABS (PWIS) conformity		VDMA24364-B1/B2-L
Continuous shock resistance to DIN/IEC 68 Part 2-82		Tested to severity level 2
CE marking (see declaration of conformity)		To UK instructions for EMC To UK RoHS instructions
Nominal operating voltage DC		5 V
Typical positioning time long stroke, horizontal		0.55/0.75 s
Min. travel speed		0,05 m/s
Operating pressure positioning/Soft Stop		4 bar ... 8 bar
Protection against torque/guide		Dual flat piston rod
Position detection		Via proximity switch With integrated displacement encoder
Functional principle of measuring system		Digital
Positioning installation position		optional
Based on standard		ISO 15552 (previously also VDMA 24562, ISO 6431, NF E49 003.1, UNI 10290)
Smallest positioning stroke		3% of max. stroke Max. 20 mm
Stroke Smart Softstop		100 mm ... 500 mm
Stroke		10 mm ... 2.000 mm

Material connector housing		PBT
Material sensor cover		Aluminium
Material piston rod		High-alloy steel
Material seals		NBR TPE-U(PU)
Note on materials		RoHS-compliant
Type of mounting		With accessories
Electrical connection encoder		8-pin
Typical friction force		75 N
Max. controllable force during advance stroke		1.683 N
Output signal		Analogue
Basic weight for 0 mm stroke		1.914 g
Moving mass for 0 mm stroke		383 g
Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke		1.682 N
Min. working load, horizontal		12 kg
Max. working load, horizontal		180 kg
Impact energy in end positions		1,3 J
Vibration resistance to DIN/IEC 68 Part 2-6		Tested to severity level 2
Max. magnetic interference field		10 KA/m at a distance of 100 mm
Corrosion resistance class CRC		1 - Low corrosion stress
Operating medium		Compressed air to ISO 8573-1:2010 [6:4:4]
CE mark (see declaration of conformity)		To EU EMC Directive In accordance with EU RoHS Directive
Mode of operation		Double-acting
Typical positioning time short stroke, horizontal		0.4/0.55 s
Max. travel speed		> 1,5 m/s
Operating pressure		≤ 174 psi
Variants		Clamping unit attached Extended piston rod Piston rod at one end
Design		Piston Piston rod Profile barrel
Soft Stop installation position		Optional
Cushioning		Elastic cushioning rings/plates at both ends
Piston diameter		63 mm
Stroke reduction at end positions		>= 15 mm
Stroke Servopneumatic positioning		100 mm ... 500 mm