FESTO 535411 standards-based cylinder

Name: 535411 FESTO
Brand: FESTO
SKU: 716256-en-usd
Price: 2795.77 USD
Availability: SoldOut

DNCI-32-400-P-A-FENG

$2,795.77 ~~$5,591.54~~ -50%

Limited stock only available on quotation

Specifications

Series (DNCI)	Standards-based cylinder, integrated displacement encoder
Piston diameter [mm] (32)	32
Stroke [mm] (400)	400
Cushioning (P)	Elastic cushioning rings/plates on both sides
Position sensing (A)	For proximity sensor
Piston rod type	At one end

Piston rod extension	None
Clamping unit	None
Guide (FENG)	Guide unit with recirculating ball bearing guide
Measured-value transducer	None
Measuring head	With measuring head

Stroke		10 mm ... 2.000 mm
Stroke Smart Softstop		100 mm ... 500 mm
Smallest positioning stroke		3% of max. stroke Max. 20 mm
Based on standard		ISO 15552 (previously also VDMA 24562, ISO 6431, NF E49 003.1, UNI 10290)
Positioning installation position		optional
Functional principle of measuring system		Digital
Position detection		Via proximity switch With integrated displacement encoder
Protection against torque/guide		Dual flat piston rod
Operating pressure positioning/Soft Stop		4 bar ... 8 bar
Min. travel speed		0,05 m/s
Typical positioning time long stroke, horizontal		0.45/0.7 s
Nominal operating voltage DC		5 V
CE marking (see declaration of conformity)		To UK instructions for EMC To UK RoHS instructions
Continuous shock resistance to DIN/IEC 68 Part 2-82		Tested to severity level 2
LABS (PWIS) conformity		VDMA24364-B1/B2-L
Degree of protection		IP65 To IEC 60529
Ambient temperature		-20 °C ... 80 °C
Max. torque for protection against torsion		≤ 0,05 Nm
Max. working load, vertical		15 kg
Min. working load, vertical		3 kg
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke		415 N ... 483 N
Additional moving mass per 10 mm stroke		8 g
Additional weight per 10 mm stroke		30 g
Repetition accuracy in ± mm		0,5 mm
Max. controllable force during return stroke		374 N
Repetition accuracy Soft Stop intermediate position		+/-2 mm
Cable length		1,5 m
Pneumatic connection		G1/8
Material cylinder barrel		Wrought aluminium alloy
Material seals		NBR TPE-U(PU)
Material piston rod		High-alloy steel
Material sensor cover		Aluminium
Material connector housing		PBT

Stroke Servopneumatic positioning		100 mm ... 500 mm
Stroke reduction at end positions		>= 10 mm
Piston diameter		32 mm
Cushioning		Elastic cushioning rings/plates at both ends
Soft Stop installation position		Optional
Design		Piston Piston rod Profile barrel
Variants		Clamping unit attached Extended piston rod Piston rod at one end With two measuring heads
Operating pressure		≤ 174 psi
Max. travel speed		> 1,5 m/s
Typical positioning time short stroke, horizontal		0.35/0.55 s
Mode of operation		Double-acting
CE mark (see declaration of conformity)		To EU EMC Directive In accordance with EU RoHS Directive
Operating medium		Compressed air to ISO 8573-1:2010 [6:4:4]
Corrosion resistance class CRC		1 - Low corrosion stress
Max. magnetic interference field		10 KA/m at a distance of 100 mm
Vibration resistance to DIN/IEC 68 Part 2-6		Tested to severity level 2
Impact energy in end positions		0,1 J
Max. working load, horizontal		45 kg
Min. working load, horizontal		3 kg
Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke		415 N
Moving mass for 0 mm stroke		95 g
Basic weight for 0 mm stroke		521 g
Output signal		Analogue
Max. controllable force during advance stroke		435 N
Typical friction force		35 N
Electrical connection encoder		8-pin
Type of mounting		With accessories
Note on materials		RoHS-compliant
Material cover		Wrought aluminium alloy
Material cable sheath		TPE-U(PUR)
Material screws		Steel
Material sensor head		POM
Mean time to failure (MTTF), subcomponent		4761 years, sensor