| Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke | 415 N | ||
| Ambient temperature | -20 °C ... 120 °C | ||
| Corrosion resistance class CRC | 0 - No corrosion stress 2 - Moderate corrosion stress | ||
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] | ||
| Explosion ignition protection type for gas | Ex h IIC T4 Gb | ||
| Explosion protection | Zone 1 (ATEX) Zone 2 (ATEX) | ||
| CE mark (see declaration of conformity) | To EU Explosion Protection Directive (ATEX) | ||
| Operating pressure | 1,5 bar ... 10 bar | ||
| Position detection | Via proximity switch | ||
| Guide | Plain-bearing guide Recirculating ball bearing guide | ||
| Cushioning | Elastic cushioning rings/plates at both ends Pneumatic cushioning, adjustable at both ends Shock absorber, soft characteristic curve | ||
| Piston diameter | 32 mm | ||
| Material piston rod | High-alloy stainless steel | ||
| Material seals | NBR | ||
| Note on materials | RoHS-compliant | ||
| alternative connections | See product drawing |
| Impact energy in end positions | 0,2 J ... 0,4 J | ||
| LABS (PWIS) conformity | VDMA24364-B1/B2-L | ||
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) | ||
| Explosion ambient temperature | -20°C <= Ta <= +70°C | ||
| ATEX category gas | II 2G | ||
| CE marking (see declaration of conformity) | To UK EX instructions | ||
| Mode of operation | Double-acting | ||
| Variants | Heat-resistant seals max. 120°C | ||
| Design | Guidance | ||
| Mounting position | optional | ||
| Operating mode, drive unit | Yoke | ||
| Stroke | 20 mm ... 400 mm | ||
| Material housing | Wrought aluminium alloy | ||
| Material cover | Wrought aluminium alloy | ||
| Pneumatic connection | G1/8 | ||
| Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke | 482 N |
