| Distance from centre of gravity of load to yoke plate xs | 10 mm | ||
| Material housing | Anodised wrought aluminium alloy | ||
| Material end plate | Anodised wrought aluminium alloy | ||
| Material seals | NBR | ||
| Note on materials | RoHS-compliant | ||
| Product weight | 38 g | ||
| Torsional backlash | 0,1 deg | ||
| Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke | 47 N | ||
| Max. permissible torque load Mx as a function of stroke | 0,057 Nm | ||
| Ambient temperature | -10 °C ... 60 °C | ||
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) | ||
| Mode of operation | Double-acting | ||
| Operating pressure | 1,5 bar ... 8 bar | ||
| Position detection | Via proximity switch | ||
| Guide | Plain-bearing guide | ||
| Cushioning | Elastic cushioning rings/plates at both ends | ||
| Piston diameter | 10 mm |
| Material piston rod | High-alloy stainless steel | ||
| Material guide rod | High-alloy stainless steel | ||
| Material dynamic seals | HNBR | ||
| Material cover | High-alloy stainless steel | ||
| Pneumatic connection | M3 | ||
| Moving mass | 10 g | ||
| Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke | 68 N | ||
| Max. effective load dependent upon stroke at defined distance xs | 3,7 N | ||
| Impact energy in end positions | 0,035 J | ||
| Corrosion resistance class CRC | 1 - Low corrosion stress | ||
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] | ||
| Max. speed | 1,7 m/s | ||
| Symbol | 991,737 | ||
| Design | Guidance | ||
| Mounting position | optional | ||
| Operating mode, drive unit | Yoke | ||
| Stroke | 5 mm |
