Festo 553193

DAPS-0030-090-RS2-F04-T6

$583.84 1 pcs. with 1 to 3 days delivery to United States

Specifications

Pneumatic connection Weight Operating Pressure Mounting Position
G1/8 1,950g 3,5 bar ... 8,4 bar optional
Size of valve actuator 30
Material shaft High-alloy steel
Material housing Wrought aluminium alloy
Material cover Wrought aluminium alloy
Pneumatic connection G1/8
Product weight 1.950 g
Spring strength 2
Spring return torque at 50° swivel angle 9,4 Nm
Note on torque The operating torque of the actuator must not be higher than the maximum permissible torque listed in ISO 5211, with reference to the size of the mounting flange and of the coupling.
Torque at nominal operating pressure and 50° swivel angle 20,7 Nm
Ambient temperature -50 °C ... 60 °C
Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will always be required)
Explosion ambient temperature -50°C <= Ta <= +60°C
Explosion ignition protection type for gas Ex h IIC T6...T3 Gb X
ATEX category gas II 2G
CE marking (see declaration of conformity) To UK EX instructions
Nominal operating pressure 5,6 bar
Supply pressure for spring strength 3,5 bar
Valve connection conforms to standard VDI/VDE 3845 (NAMUR)
Closing direction Closes to the right
Design Scotch yoke system
Mounting position optional
Fitting connection conforms to standard ISO 5211
Shaft connection depth 16,5 mm
End-position adjustment range at 0° -1 deg ... 9 deg
Flange hole pattern F04
Material number shaft 1.43
Material screws High-alloy steel
Material seals FVMQ PTFE reinforced
Note on materials Contains paint-wetting impairment substances RoHS-compliant
Shaft connection T14
Air consumption at 0.6 MPa (6 bar, 87 psi) per cycle 0°-nominal swivel angle-0° 1,19 l
Spring return torque at 90° swivel angle 18,8 Nm
Spring return torque at 0° swivel angle 12,5 Nm
Torque at nominal operating pressure and 90° swivel angle 31,3 Nm
Torque at nominal operating pressure and 0° swivel angle 37,6 Nm
Corrosion resistance class CRC 3 - high corrosion stress
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Explosion ignition protection type for dust Ex h IIIC T85°C...T200°C Db X
ATEX category dust II 2D
Explosion protection Zone 1 (ATEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 22 (ATEX)
CE mark (see declaration of conformity) To EU Explosion Protection Directive (ATEX)
Operating pressure 3,5 bar ... 8,4 bar
Safety Integrity Level (SIL) Up to SIL 2 High Demand mode To SIL 2 Low Demand mode
Symbol 991,266
Position detection Without
Mode of operation Single-acting
Cushioning No cushioning
Note on end-position adjusting range One end position optionally adjustable
End-position adjustment range at nominal swivel angle 81 deg ... 91 deg
Swivel angle 90 deg
$583.84
Stock 1 pcs.
Part number 553193
Manufacturer Festo
Quantity Unit Price
1+ $583.84
  • Open Registration
    Create your account instantly
  • Support 24/7
    Ask us anytime
  • 100% Safety
    Only secure payments: bank transfer, credit card and PayPal
  • Volume Discounts
    Optimize your supplies