| Contact angle | α | 25 | ° |
| Minimum chamfer dimension | rmin | 2 | mm |
| Distance between the apexes of the pressure cones | a | 41.50 | mm |
| Minimum diameter injection pitch | Etk min | 106.60 | mm |
| Shoulder diameter outer ring clearance | Da | H12 | |
| Diameter shaft shoulder clearance | da | h12 |
| Maximum diameter injection pitch | Etk max | 113.20 | mm |
| Maximum recess radius | ra max | 1 | mm |
| Shoulder diameter outer ring | Da | 138 | mm |
| Diameter shaft shoulder | da | 98 | mm |
| Limiting speed for oil lubrication | nG Oil | 13,000 | |
| Fatigue load limit, radial | Cur | 5,500 | |
| Basic dynamic load rating, radial | Cr | 93,000 | |
| Outside diameter | D | 150 | mm |
| Limiting speed for grease lubrication | nG Grease | 8,000 | |
| Basic static load rating, radial | C0r | 57,000 | |
| Width | B | 28 | mm |
| Bore diameter | d | 85 | mm |
