| Outside diameter | D | 100 | mm |
| Limiting speed for oil lubrication | nG Oil | 22,000 | |
| Fatigue load limit, radial | Cur | 2,800 | |
| Basic dynamic load rating, radial | Cr | 47,000 |
| Bore diameter | d | 55 | mm |
| Limiting speed for grease lubrication | nG Grease | 14,000 | |
| Basic static load rating, radial | C0r | 26,500 | |
| Width | B | 21 | mm |
| Contact angle | α | 15 | ° |
| Minimum chamfer dimension | rmin | 1.50 | mm |
| Distance between the apexes of the pressure cones | a | 20.90 | mm |
| Minimum diameter injection pitch | Etk min | 69.90 | mm |
| Shoulder diameter outer ring clearance | Da | H12 | |
| Diameter shaft shoulder clearance | da | h12 |
| Maximum diameter injection pitch | Etk max | 74.30 | mm |
| Maximum recess radius | ra max | 0.60 | mm |
| Shoulder diameter outer ring | Da | 92 | mm |
| Diameter shaft shoulder | da | 63 | mm |
| Manufacturer | Part Number |
|---|---|
| SKF | 7211 CD-GA/P4A (SKF) |
| Marlin-Rockwell Corp. | 211RDS-ABEC7 |
| Marlin-Rockwell Corp. | 211RDS-BKE#7 |
| Fafnir | 2MM211WI-CRUL |
| Koyo | 7211CGLFGP4 |
| Koyo | 7211CPAGLFTP4 |
| RHP | 7211CTRSULP3 |
| RHP | 7211CTRSULP4 |
| RHP | 7211-C T SUL P4 (RHP) |
| NSK | 7211C TY SUL P4 (NSK) |
| SNFA | E255-7CE1-UL |
| GPZ Bearings | 36211 |
