| Contact angle | α | 25 | ° |
| Minimum chamfer dimension | rmin | 1.10 | mm |
| Distance between the apexes of the pressure cones | a | 75 | mm |
| Minimum diameter injection pitch | Etk min | 224.70 | mm |
| Shoulder diameter outer ring clearance | Da | H12 | |
| Diameter shaft shoulder clearance | da | h12 |
| Maximum diameter injection pitch | Etk max | 233.10 | mm |
| Maximum recess radius | ra max | 1 | mm |
| Shoulder diameter outer ring | Da | 266 | mm |
| Diameter shaft shoulder | da | 214 | mm |
| Limiting speed for oil lubrication | nG Oil | 6,300 | |
| Fatigue load limit, radial | Cur | 11,600 | |
| Basic dynamic load rating, radial | Cr | 199,000 | |
| Outside diameter | D | 280 | mm |
| Limiting speed for grease lubrication | nG Grease | 4,000 | |
| Basic static load rating, radial | C0r | 170,000 | |
| Width | B | 38 | mm |
| Bore diameter | d | 200 | mm |
