| Contact angle | α | 15 | ° |
| Minimum chamfer dimension | rmin | 1.50 | mm |
| Distance between the apexes of the pressure cones | a | 34.10 | mm |
| Minimum diameter injection pitch | Etk min | 155.50 | mm |
| Shoulder diameter outer ring clearance | Da | H12 | |
| Diameter shaft shoulder clearance | da | h12 |
| Maximum diameter injection pitch | Etk max | 160.60 | mm |
| Maximum recess radius | ra max | 0.60 | mm |
| Shoulder diameter outer ring | Da | 181 | mm |
| Diameter shaft shoulder | da | 149 | mm |
| Limiting speed for oil lubrication | nG Oil | 10,000 | |
| Fatigue load limit, radial | Cur | 6,400 | |
| Basic dynamic load rating, radial | Cr | 94,000 | |
| Outside diameter | D | 190 | mm |
| Limiting speed for grease lubrication | nG Grease | 6,700 | |
| Basic static load rating, radial | C0r | 77,000 | |
| Width | B | 24 | mm |
| Bore diameter | d | 140 | mm |
