| Minimum diameter injection pitch | Etk min | 128.60 | mm |
| Distance between the apexes of the pressure cones | a | 46.60 | mm |
| Maximum recess radius | ra max | 1 | mm |
| Diameter shaft shoulder clearance | da | h12 |
| Maximum diameter injection pitch | Etk max | 135.10 | mm |
| Shoulder diameter outer ring clearance | Da | H12 | |
| Diameter shaft shoulder | da | 121 | mm |
| Shoulder diameter outer ring | Da | 159 | mm |
| Minimum chamfer dimension | rmin | 2 | mm |
| Contact angle | α | 25 | ° |
| Bore diameter | d | 110 | mm |
| Width | B | 28 | mm |
| Basic static load rating, radial | C0r | 73,000 | |
| Limiting speed for grease lubrication | nG Grease | 7,500 |
| Outside diameter | D | 170 | mm |
| Basic dynamic load rating, radial | Cr | 106,000 | |
| Fatigue load limit, radial | Cur | 6,600 | |
| Limiting speed for oil lubrication | nG Oil | 12,000 |
| Manufacturer | Part Number |
|---|---|
| SNFA | EX110-7CE3-UM |
| SKF | 7022 ACD-GB/P4A (SKF) |
| RHP | 7022A5TRSUMP3 |
| RHP | 7022A5TRSUMP4 |
