| Operating pressure | 87 psi ... 145 psi | ||
| Position detection | Via proximity switch | ||
| Piston-rod end | Female thread | ||
| Mounting position | optional | ||
| Piston diameter | 63 mm | ||
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] | ||
| Material cylinder barrel | Wrought aluminium alloy | ||
| Material dynamic seals | NBR TPE-U(PU) | ||
| Material collar screws | Galvanised steel | ||
| Type of mounting | With through-hole With accessories Either: | ||
| Basic weight for 0 mm stroke | 1.059 g | ||
| Moving mass for 0 mm stroke | 134 g | ||
| Impact energy in end positions | 0,7 J | ||
| LABS (PWIS) conformity | VDMA24364-B1/B2-L | ||
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
| Symbol | 991,729 | ||
| Design | Piston Piston rod | ||
| Mode of operation | Single-acting Pushing | ||
| Cushioning | Elastic cushioning rings/plates at both ends | ||
| Stroke | 1 mm ... 25 mm | ||
| Variants | Piston rod at one end | ||
| Material piston rod | High-alloy steel | ||
| Material cover | Wrought aluminium alloy | ||
| Pneumatic connection | G1/8 | ||
| Additional weight per 10 mm stroke | 107 g | ||
| Additional moving mass per 10 mm stroke | 16 g | ||
| Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke | 1.799 N | ||
| Ambient temperature | -20 °C ... 80 °C | ||
| Corrosion resistance class CRC | 2 - Moderate corrosion stress |
