Material cylinder barrel | Wrought aluminium alloy Smooth anodised | ||
Material cover | Aluminium Anodised | ||
Pneumatic connection | M5 | ||
Additional weight per 10 mm stroke | 14 g | ||
Additional moving mass per 10 mm stroke | 4 g | ||
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke | 90 N ... 121 N | ||
Ambient temperature | -20 °C ... 120 °C | ||
Suitability for the production of Li-ion batteries | Metals with more than 1% copper, zinc or nickel by mass are excluded from use. Exceptions are nickel in steel, chemically nickel-plated surfaces, printed circuit boards, cables, electrical plug connectors and coils | ||
Corrosion resistance class CRC | 0 - No corrosion stress 2 - Moderate corrosion stress 3 - high corrosion stress | ||
Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] | ||
Explosion ignition protection type for dust | Ex h IIIC T120°C Db | ||
ATEX category dust | II 2D | ||
Explosion protection | Zone 1 (ATEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 22 (ATEX) | ||
CE mark (see declaration of conformity) | To EU Explosion Protection Directive (ATEX) | ||
Operating pressure | 1 bar ... 10 bar | ||
Position detection | Via proximity switch | ||
Mounting position | optional | ||
Based on standard | ISO 21287 | ||
Stroke | 1 mm ... 300 mm |
Material piston rod | High-alloy steel | ||
Note on materials | RoHS-compliant | ||
Type of mounting | With through-hole Via female thread With accessories Either: | ||
Basic weight for 0 mm stroke | 79 g | ||
Moving mass for 0 mm stroke | 15 g | ||
Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke | 90 N | ||
Cleanroom class | Class 4 according to ISO 14644-1 Class 5 according to ISO 14644-1 | ||
LABS (PWIS) conformity | VDMA24364-B1/B2-L VDMA24364 zone III | ||
Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) | ||
Explosion ambient temperature | -20°C <= Ta <= +60°C | ||
Explosion ignition protection type for gas | Ex h IIC T4 Gb | ||
ATEX category gas | II 2G | ||
CE marking (see declaration of conformity) | To UK EX instructions | ||
Mode of operation | Double-acting | ||
Variants | EX protection approval (ATEX) Metals with copper, zinc or nickel as main constituent are excluded from use. Exceptions are nickel in steel, chemically nickel-plated surfaces, printed circuit boards, cables, electrical plug connectors and coils. Extended male piston rod thread Custom thread on the piston rod Extended piston rod With protection against rotation High corrosion protection Uniform, slow movement Low friction Through piston rod Through, hollow piston rod Heat-resistant seals max. 120°C Laser etched rating plate Piston rod at one end | ||
Design | Piston Piston rod Profile barrel | ||
Cushioning | Elastic cushioning rings/plates at both ends | ||
Piston diameter | 16 mm |