8148292 Festo

FESTO 8148292 servo motor

Name: 8148292 FESTO
Brand: FESTO
SKU: 716375-en-usd
Price: 6623.45 USD
Availability: InStock

EMMT-AS-150-MK-HV-R3MB

$6,623.45 ~~$13,246.90~~ -50%

1 pcs. with 3 to 4 week lead time shipping to United States

Specifications

Series (EMMT)	Servo motor
Motor type (AS)	AC synchronous
Flange size, motors [mm] (150)	150
Length (M)	Medium
Output shaft (K)	Shaft to DIN 6885

Radial shaft seal	None
Winding (HV)	High voltage, speed optimised
Electrical connection (R3)	Angled plug M40, rotatable
Measuring unit (M)	Absolute encoder, multi-turn
Brake (B)	With brake

Technical data

Ambient temperature		-15 °C ... 40 °C
Max. installation height		4.000 m
Storage temperature		-20 °C ... 70 °C
Conforms to standard		IEC 60034
Max. winding temperature		155 °C
Temperature monitoring		Digital motor temperature transmission via EnDat® 2.2
Mounting position		optional
Note on degree of protection		IP21 for motor shaft without rotary shaft seal IP65 for motor shaft with rotary shaft seal IP67 for motor housing including connection components
Balance quality		G 2.5
Storage lifetime under nominal conditions		20.000 h
Interface code, motor out		150A
Electrical connection 1, connector system		M40x1
Electrical connection 1, connection pattern		00997380
Note on materials		RoHS-compliant
LABS (PWIS) conformity		VDMA24364 zone III
Shock resistance		As per EN 60068-2-29 15 g/11 ms to EN 60068-2-27
CE mark (see declaration of conformity)		To EU EMC Directive To EU Low Voltage Directive In accordance with EU RoHS Directive
Nominal operating voltage DC		680 V
Number of pole pairs		5
Nominal torque		13,5 Nm
Nominal rotary speed		3.500 rpm
Max. mechanical speed		10.000 rpm
Continuous stall current		24 A
Peak current		50 A
Standstill torque constant		1,54 Nm/A
Phase-phase winding resistance		0,211 Ohm
Winding longitudinal inductivity Ld (phase)		1,65 mH
Electric time constant		15,6 ms
Thermal resistance		0,46 K/W
Total mass moment of inertia of output		46,9 kgcm²
Permissible axial shaft load		217 N
Rotor position sensor		Absolute multi-turn encoder
rotor position sensor, absolute detectable revolutions		4.10
Rotor position sensor, encoder measuring principle		Inductive
rotor position sensor, DC operating voltage range		3,6 V ... 14 V
Rotor position transducer resolution		19 bit
Brake holding torque		45 Nm
Brake current consumption		1,08 A
Brake separation time		230 ms
DC brake response delay		6 ms
Mass moment of inertia of brake		8,2 kgcm²
Mean time to failure (MTTF), subcomponent		190 years, rotor position sensor
Energy efficiency		ENEFF (CN) / Class 1

Note on ambient temperature		Up to 80°C with derating of -1.5% per degree Celsius
Note on max. installation height		As of 1,000 m: only with derating of -1.0% per 100 m
Relative air humidity		0 - 90%
Temperature class as per EN 60034-1		F
Rating class as per EN 60034-1		S1
Motor type to EN 60034-7		IM B5 IM V1 IM V3
Degree of protection		IP21
Concentricity, coaxiality, axial runout to DIN SPEC 42955		N
Detent torque		<1.0% of the peak torque
Featherkey shaft type		DIN 6885 A 8 x 7 x 36
Electrical connection 1, connection type		Hybrid plug
Electrical connection 1, number of connections/cores		15
Pollution degree		2
Corrosion resistance class CRC		0 - No corrosion stress
Vibration resistance		As per EN 60068-2-6
Approval		RCM trademark
CE marking (see declaration of conformity)		To UK instructions for EMC To UK regulations for electrical equipment To UK RoHS instructions
Type of winding switch		Star inside
Standstill torque		33 Nm
Peak torque		60 Nm
Max. rotational speed		5.051 rpm
Nominal power rating of motor		4.948 W
Nominal motor current		10,2 A
Motor constant		1,32 Nm/A
Voltage constant, phase-to-phase		92,9 mVmin
Phase-phase winding inductance		3,3 mH
Winding cross inductivity Lq (phase)		1,65 mH
Thermal time constant		45 min
Measuring flange		450 x 450 x 30 mm, steel
Product weight		22.200 g
Permissible radial shaft load		1.085 N
rotor position sensor, manufacturer designation		EQI 1331
Rotor position encoder interface		EnDat® 22
rotor position sensor, DC operating voltage		5 V
rotor position sensor, position values per revolution		524.288
rotor position sensor, system accuracy of angle measurement		-65 arcsec ... 65 arcsec
Operating voltage DC for brake		24 V
Power consumption, brake		26 W
Brake closing time		45 ms
Max. brake no-load speed		10.000 rpm
Switching cycles holding brake		5 million idle actuations (without friction work!)
Mean time to dangerous failure (MTTFd), subcomponent		380 years, rotor position sensor