| Fatigue load limit, radial | Cur | 21,000 | |
| Reference speed | nϑr | 1,560 | |
| Outside diameter | D | 420 | mm |
| Basic dynamic load rating, radial | Cr | 475,000 |
| Limiting speed | nG | 2,360 | |
| Bore diameter | d | 200 | mm |
| Width | B | 80 | mm |
| Basic static load rating, radial | C0r | 710,000 |
| Minimum diameter of shaft shoulder | da min | 220 | mm |
| Maximum diameter of housing shoulder | Db max | 409 | mm |
| Maximum fillet radius of housing | ra1 max | 2 | mm |
| Maximum diameter of housing shoulder | Da max | 400 | mm |
| Maximum fillet radius of shaft | ra max | 4 | mm |
| Minimum chamfer dimension | rmin | 2 | mm |
| Shoulder diameter on inner ring wide side face | d1 | 288.85 | mm |
| Contact angle | α | 40 | ° |
| Shoulder diameter on outer ring wide side face | D1 | 336.60 | mm |
| Distance between the apexes of the pressure cones | a | 170 | mm |
