| Contact angle | α | 40 | ° |
| Shoulder diameter on inner ring wide side face | d1 | 259 | mm |
| Minimum chamfer dimension | rmin | 1.50 | mm |
| Distance between the apexes of the pressure cones | a | 155 | mm |
| Shoulder diameter on outer ring wide side face | D1 | 303 | mm |
| Maximum fillet radius of housing | ra1 max | 1.50 | mm |
| Maximum diameter of housing shoulder | Db max | 371 | mm |
| Minimum diameter of shaft shoulder | da min | 197 | mm |
| Maximum fillet radius of shaft | ra max | 3 | mm |
| Maximum diameter of housing shoulder | Da max | 363 | mm |
| Reference speed | nϑr | 1,760 | |
| Fatigue load limit, radial | Cur | 19,000 | |
| Basic dynamic load rating, radial | Cr | 430,000 | |
| Outside diameter | D | 380 | mm |
| Limiting speed | nG | 2,600 | |
| Basic static load rating, radial | C0r | 610,000 | |
| Width | B | 75 | mm |
| Bore diameter | d | 180 | mm |
