| Contact angle | α | 40 | ° |
| Shoulder diameter on inner ring wide side face | d1 | 204.40 | mm |
| Minimum chamfer dimension | rmin | 1.50 | mm |
| Distance between the apexes of the pressure cones | a | 123 | mm |
| Shoulder diameter on outer ring wide side face | D1 | 239.50 | mm |
| Maximum fillet radius of housing | ra1 max | 1.50 | mm |
| Maximum diameter of housing shoulder | Db max | 291 | mm |
| Minimum diameter of shaft shoulder | da min | 157 | mm |
| Maximum fillet radius of shaft | ra max | 3 | mm |
| Maximum diameter of housing shoulder | Da max | 283 | mm |
| Reference speed | nϑr | 2,400 | |
| Fatigue load limit, radial | Cur | 13,100 | |
| Basic dynamic load rating, radial | Cr | 310,000 | |
| Outside diameter | D | 300 | mm |
| Limiting speed | nG | 3,350 | |
| Basic static load rating, radial | C0r | 375,000 | |
| Width | B | 62 | mm |
| Bore diameter | d | 140 | mm |
