| Basic dynamic load rating, radial | Cr | 110,000 | |
| Outside diameter | D | 140 | mm |
| Reference speed | nϑr | 5,000 | |
| Fatigue load limit, radial | Cur | 5,600 |
| Width | B | 33 | mm |
| Bore diameter | d | 65 | mm |
| Limiting speed | nG | 6,500 | |
| Basic static load rating, radial | C0r | 82,000 |
| Contact angle | α | 40 | ° |
| Shoulder diameter on inner ring wide side face | d1 | 95.30 | mm |
| Minimum chamfer dimension | rmin | 1.10 | mm |
| Distance between the apexes of the pressure cones | a | 60 | mm |
| Shoulder diameter on outer ring wide side face | D1 | 111.52 | mm |
| Maximum fillet radius of housing | ra1 max | 1 | mm |
| Maximum diameter of housing shoulder | Db max | 133 | mm |
| Minimum diameter of shaft shoulder | da min | 77 | mm |
| Maximum fillet radius of shaft | ra max | 2.10 | mm |
| Maximum diameter of housing shoulder | Da max | 128 | mm |
