| Basic dynamic load rating, radial | Cr | 69,000 | |
| Outside diameter | D | 100 | mm |
| Reference speed | nϑr | 6,500 | |
| Fatigue load limit, radial | Cur | 3,000 |
| Width | B | 25 | mm |
| Bore diameter | d | 45 | mm |
| Limiting speed | nG | 12,100 | |
| Basic static load rating, radial | C0r | 43,000 |
| Contact angle | α | 40 | ° |
| Shoulder diameter on inner ring wide side face | d1 | 66.70 | mm |
| Minimum chamfer dimension | rmin | 1 | mm |
| Distance between the apexes of the pressure cones | a | 43 | mm |
| Shoulder diameter on outer ring wide side face | D1 | 79.80 | mm |
| Maximum fillet radius of housing | ra1 max | 1 | mm |
| Maximum diameter of housing shoulder | Db max | 94.40 | mm |
| Minimum diameter of shaft shoulder | da min | 54 | mm |
| Maximum fillet radius of shaft | ra max | 1.50 | mm |
| Maximum diameter of housing shoulder | Da max | 91 | mm |
