| Contact angle | α | 40 | ° |
| Shoulder diameter on inner ring wide side face | d1 | 197.50 | mm |
| Minimum chamfer dimension | rmin | 1.10 | mm |
| Distance between the apexes of the pressure cones | a | 111 | mm |
| Shoulder diameter on outer ring wide side face | D1 | 223.50 | mm |
| Maximum fillet radius of housing | ra1 max | 1 | mm |
| Maximum diameter of housing shoulder | Db max | 263 | mm |
| Minimum diameter of shaft shoulder | da min | 164 | mm |
| Maximum fillet radius of shaft | ra max | 2.50 | mm |
| Maximum diameter of housing shoulder | Da max | 256 | mm |
| Reference speed | nϑr | 2,850 | |
| Fatigue load limit, radial | Cur | 13,200 | |
| Basic dynamic load rating, radial | Cr | 245,000 | |
| Outside diameter | D | 270 | mm |
| Limiting speed | nG | 4,100 | |
| Basic static load rating, radial | C0r | 275,000 | |
| Width | B | 45 | mm |
| Bore diameter | d | 150 | mm |
