| Distance between the apexes of the pressure cones | a | 72 | mm |
| Minimum chamfer dimension | rmin | 1.10 | mm |
| Shoulder diameter on inner ring wide side face | d1 | 125.30 | mm |
| Contact angle | α | 40 | ° |
| Shoulder diameter on outer ring wide side face | D1 | 141.50 | mm |
| Bore diameter | d | 95 | mm |
| Width | B | 32 | mm |
| Basic static load rating, radial | C0r | 106,000 | |
| Limiting speed | nG | 5,200 |
| Outside diameter | D | 170 | mm |
| Basic dynamic load rating, radial | Cr | 123,000 | |
| Fatigue load limit, radial | Cur | 6,400 | |
| Reference speed | nϑr | 4,450 |
| Minimum diameter of shaft shoulder | da min | 107 | mm |
| Maximum diameter of housing shoulder | Db max | 163 | mm |
| Maximum fillet radius of housing | ra1 max | 1 | mm |
| Maximum diameter of housing shoulder | Da max | 158 | mm |
| Maximum fillet radius of shaft | ra max | 2.10 | mm |
