| a - Charge load application point | 17 mm | ||
| D1 - Inner diameter outer ring | 44,05 mm | ||
| ra max - Max shaft & housing fillet radius | 1 mm | ||
| Db max - Max OR shoulder diameter | 46,5 mm | ||
| db min - Min IR shoulder diameter | 30,5 mm | ||
| BSF - Characteristic rolling element frequency | 4,755 Hz | ||
| BPFI - Characteristic inner ring frequency | 7,697 Hz | ||
| Nlim - Grease lubrication limit speed | 25000 tr/min | ||
| Tmax - Max operating temperature | 120 °C | ||
| Radial rigidity | 216 N/µm | ||
| Preload value | 0,15 kN | ||
| Axial displacement K Factor | 0.74 | ||
| Cu - Fatigue limit load | 0,59 kN | ||
| C - Dynamic load | 16,8 kN | ||
| rs - Min fillet radius | 1 mm |
| D2 - Inner diameter outer ring | 47,73 mm | ||
| Brand | SNR | ||
| r1a - Max fillet radius | 0,6 mm | ||
| Da max - Max shoulder diameter OR | 46,5 mm | ||
| da min - Min shoulder diameter IR | 30,5 mm | ||
| FTF - Characteristic cage frequency | 0,408 Hz | ||
| BPFO - Characteristic outer ring frequency | 5,303 Hz | ||
| Nlim - Oil lubrication limit speed | 38000 tr/min | ||
| Tmin - Min operating temperature | -30 °C | ||
| Axial rigidity | 104 N/µm | ||
| Preload level | 7 | ||
| f0 - Coefficient | 14.35 | ||
| C0 - Static load | 10,6 kN | ||
| r1s - Min fillet radius | 0,6 mm | ||
| α - Contact angle | 25 ° |
