Bore diameter | d | 15 | mm |
Width | B | 11 | mm |
Basic static load rating, radial | C0r | 4,450 | |
Limiting speed | nG | 29,500 |
Outside diameter | D | 35 | mm |
Basic dynamic load rating, radial | Cr | 8,900 | |
Fatigue load limit, radial | Cur | 305 | N |
Reference speed | nϑr | 19,100 |
Minimum diameter of shaft shoulder | da min | 19.20 | mm |
Maximum diameter of housing shoulder | Db max | 32.60 | mm |
Maximum fillet radius of housing | ra1 max | 0.30 | mm |
Maximum diameter of housing shoulder | Da max | 30.80 | mm |
Maximum fillet radius of shaft | ra max | 0.60 | mm |
Minimum chamfer dimension | rmin | 0.30 | mm |
Shoulder diameter on inner ring wide side face | d1 | 22.80 | mm |
Contact angle | α | 40 | ° |
Shoulder diameter on outer ring wide side face | D1 | 27.60 | mm |
Distance between the apexes of the pressure cones | a | 16 | mm |