| Bore diameter | d | 360 | mm |
| Width | B | 56 | mm |
| Basic static load rating, radial | C0r | 600,000 | |
| Limiting speed | nG | 1,910 |
| Outside diameter | D | 480 | mm |
| Basic dynamic load rating, radial | Cr | 345,000 | |
| Fatigue load limit, radial | Cur | 17,300 | |
| Reference speed | nϑr | 1,170 |
| Minimum diameter of shaft shoulder | da min | 372.40 | mm |
| Maximum diameter of housing shoulder | Db max | 474 | mm |
| Maximum fillet radius of housing | ra1 max | 1 | mm |
| Maximum diameter of housing shoulder | Da max | 467.60 | mm |
| Maximum fillet radius of shaft | ra max | 2.50 | mm |
| Minimum chamfer dimension | rmin | 1.10 | mm |
| Shoulder diameter on inner ring wide side face | d1 | 405.65 | mm |
| Contact angle | α | 30 | ° |
| Shoulder diameter on outer ring wide side face | D1 | 437.10 | mm |
| Distance between the apexes of the pressure cones | a | 149 | mm |
