| Contact angle | α | 30 | ° |
| Shoulder diameter on inner ring wide side face | d1 | 438.40 | mm |
| Minimum chamfer dimension | rmin | 1.10 | mm |
| Distance between the apexes of the pressure cones | a | 153 | mm |
| Shoulder diameter on outer ring wide side face | D1 | 463.80 | mm |
| Maximum fillet radius of housing | ra1 max | 1 | mm |
| Maximum diameter of housing shoulder | Db max | 494 | mm |
| Minimum diameter of shaft shoulder | da min | 410.20 | mm |
| Maximum fillet radius of shaft | ra max | 2.10 | mm |
| Maximum diameter of housing shoulder | Da max | 489.80 | mm |
| Reference speed | nϑr | 1,020 | |
| Fatigue load limit, radial | Cur | 14,300 | |
| Basic dynamic load rating, radial | Cr | 295,000 | |
| Outside diameter | D | 500 | mm |
| Limiting speed | nG | 1,820 | |
| Basic static load rating, radial | C0r | 530,000 | |
| Width | B | 46 | mm |
| Bore diameter | d | 400 | mm |
