| Bore diameter | d | 500 | mm |
| Width | B | 56 | mm |
| Basic static load rating, radial | C0r | 790,000 | |
| Limiting speed | nG | 1,440 |
| Outside diameter | D | 620 | mm |
| Basic dynamic load rating, radial | Cr | 390,000 | |
| Fatigue load limit, radial | Cur | 19,700 | |
| Reference speed | nϑr | 790 | 1/min |
| Minimum diameter of shaft shoulder | da min | 512.40 | mm |
| Maximum diameter of housing shoulder | Db max | 614 | mm |
| Maximum fillet radius of housing | ra1 max | 1 | mm |
| Maximum diameter of housing shoulder | Da max | 607.60 | mm |
| Maximum fillet radius of shaft | ra max | 2.50 | mm |
| Minimum chamfer dimension | rmin | 1.10 | mm |
| Shoulder diameter on inner ring wide side face | d1 | 545.95 | mm |
| Contact angle | α | 30 | ° |
| Shoulder diameter on outer ring wide side face | D1 | 576.80 | mm |
| Distance between the apexes of the pressure cones | a | 190 | mm |
