| Basic dynamic load rating, radial | Cr | 940,000 | |
| Outside diameter | D | 1,220 | |
| Reference speed | nϑr | 340 | 1/min |
| Fatigue load limit, radial | Cur | 50,000 |
| Width | B | 100 | mm |
| Bore diameter | d | 1,000 | |
| Limiting speed | nG | 690 | 1/min |
| Basic static load rating, radial | C0r | 2,850,000 |
| Contact angle | α | 30 | ° |
| Shoulder diameter on inner ring wide side face | d1 | 1,083.4 | |
| Minimum chamfer dimension | rmin | 3 | mm |
| Distance between the apexes of the pressure cones | a | 370 | mm |
| Shoulder diameter on outer ring wide side face | D1 | 1,139.8 |
| Maximum fillet radius of housing | ra1 max | 2.50 | mm |
| Maximum diameter of housing shoulder | Db max | 1,207.6 | |
| Minimum diameter of shaft shoulder | da min | 1,023 |
| Maximum fillet radius of shaft | ra max | 5 | mm |
| Maximum diameter of housing shoulder | Da max | 1,197 |
