| Bore diameter | d | 190 | mm |
| Width | B | 46 | mm |
| Basic static load rating, radial | C0r | 310,000 | |
| Limiting speed | nG | 3,350 |
| Outside diameter | D | 290 | mm |
| Basic dynamic load rating, radial | Cr | 228,000 | |
| Fatigue load limit, radial | Cur | 10,400 | |
| Reference speed | nϑr | 2,390 |
| Minimum diameter of shaft shoulder | da min | 200.20 | mm |
| Maximum diameter of housing shoulder | Db max | 284 | mm |
| Maximum fillet radius of housing | ra1 max | 1 | mm |
| Maximum diameter of housing shoulder | Da max | 279.80 | mm |
| Maximum fillet radius of shaft | ra max | 2.10 | mm |
| Minimum chamfer dimension | rmin | 1.10 | mm |
| Shoulder diameter on inner ring wide side face | d1 | 228.04 | mm |
| Contact angle | α | 30 | ° |
| Shoulder diameter on outer ring wide side face | D1 | 254.10 | mm |
| Distance between the apexes of the pressure cones | a | 92 | mm |
