| Contact angle | α | 30 | ° |
| Shoulder diameter on inner ring wide side face | d1 | 192.40 | mm |
| Minimum chamfer dimension | rmin | 1.10 | mm |
| Distance between the apexes of the pressure cones | a | 77 | mm |
| Shoulder diameter on outer ring wide side face | D1 | 208 | mm |
| Maximum fillet radius of housing | ra1 max | 1 | mm |
| Maximum diameter of housing shoulder | Db max | 234 | mm |
| Minimum diameter of shaft shoulder | da min | 170.20 | mm |
| Maximum fillet radius of shaft | ra max | 2.10 | mm |
| Maximum diameter of housing shoulder | Da max | 229.80 | mm |
| Reference speed | nϑr | 2,950 | |
| Fatigue load limit, radial | Cur | 7,400 | |
| Basic dynamic load rating, radial | Cr | 160,000 | |
| Outside diameter | D | 240 | mm |
| Limiting speed | nG | 4,100 | |
| Basic static load rating, radial | C0r | 200,000 | |
| Width | B | 38 | mm |
| Bore diameter | d | 160 | mm |
