pumps | 1.44 cid manual piston p ump assy | ||
displacement | 12 : 20.3 cm3/r [1.24 in3/r] | ||
valve plate | 2 : valve plate- type 2 | ||
control shaft location | r : right side | ||
main port location (a and b) | 1 : opposite sides | ||
relief valve setting for main port a | n : 275.8 bar [4000 lbf/in2] | ||
charge disp. & suction port size (s) | 1 : 6.9 cm3/r [.42 in3/r]; (.750-16 unf-2b sae o-ring port for suction inlet - right side ccw, left side cw) | ||
charge special feature | 0 : no special charge feature | ||
special features auxiliary mounting | 00 : no special features | ||
aux port top-rear (c2) | 2 : .750-16 unf-2b sae o-ring port plugged | ||
case drain (d1 and d2) | a : .750-16 unf-2b sae o-ring port d1-top (d2-bottom plugged) | ||
Additional functions | 0 : no additional functions | ||
paint | 0b : black per spec 209-13b | ||
design code | c : c |
code title | adb : danfoss medium duty manually variable displacement axial piston pump | ||
input shaft rotation | r : right hand rotation (cw) | ||
input shaft | a : 13 tooth external spline, 16/32 pitch, 21.806 [.8585] major diameter; 41.2 [1.62] shaft extension | ||
control shaft | a : with thru cross hole diameter 6.35 [.250], arm diameter 17.32 [.682]; 113 [4.45] from unit centerline to control shaft end | ||
main port size (a and b) | 1 : 1.0625-12 un-2b sae o-ring ports | ||
relief valve setting for main port b | n : 275.8 bar [4000 lbf/in2] | ||
charge relief setting & routing | a : 6.89-10.34 bar [100-150 lbf/in2] relieved to case | ||
auxiliary rear mount and output shaft | a : with integral charge - horizontal sae j744 flange 82-2 (2 bolt a); 9 tooth internal 16/32 pitch spline with 31.7 [1.25] shaft extension | ||
aux port top-front (c1) or bypass valve | 3 : bypass valve installed | ||
aux port side (c4 or c5) (chg pump only) | 0 : no auxiliary port | ||
thru drain front (d4) | 0 : no thru drain (d4)-front | ||
special features | 00 : none | ||
identification | 0 : danfoss identification label |