| Db min - Min stop ring position diameter | 118 mm | ||
| ra max - Max shaft & housing fillet radius | 2 mm | ||
| da max - Max shoulder diameter IR | 64,7 mm | ||
| BSF - Characteristic rolling element frequency | 4,072 Hz | ||
| BPFI - Characteristic inner ring frequency | 4,929 Hz | ||
| Tmax - Max operating temperature | 120 °C | ||
| Nlim - Mechanical Limit Speed | 8100 tr/min | ||
| f0 - Coefficient | 13.20 | ||
| C0 - Static load | 38,3 kN | ||
| Radial clearance class | CN | ||
| f - Stop ring thickness | 2,41 mm | ||
| r0 max - Max bottom groove radius | 0,6 mm | ||
| b min - Min groove width | 2,7 mm | ||
| rNs - Min fillet radius | 0,5 mm | ||
| Ca max - Max segment position | 5,74 mm | ||
| a max - Max position groove | 3,28 mm | ||
| D1 - Inner diameter outer ring | 98 mm |
| rNa max - Max fillet radius on segment side | 0,5 mm | ||
| Da max - Max shoulder diameter OR | 101 mm | ||
| da min - Min shoulder diameter IR | 59 mm | ||
| FTF - Characteristic cage frequency | 0,384 Hz | ||
| BPFO - Characteristic outer ring frequency | 3,071 Hz | ||
| Tmin - Min operating temperature | -30 °C | ||
| Nref - Reference thermal speed | 7700 tr/min | ||
| Cu - Fatigue limit load | 1,74 kN | ||
| C - Dynamic load | 65,4 kN | ||
| Snap ring reference | R110 | ||
| D4 max - Max outer diameter of assembled stop ring | 116,6 mm | ||
| b max - Max groove width | 3 mm | ||
| D3 - Max bottom groove diameter | 106,81 mm | ||
| rs - Min fillet radius | 2 mm | ||
| Ca min - Mini segment position | 5,43 mm | ||
| a min - Min position Groove | 3,07 mm | ||
| Brand | SNR |
